HVT-50D / 50LD
- Cranking
- 600 CCA
- Capacity
- 60 Ah (20-hour)
- Case L × W × H
- 238 × 172 × 182 mm
- Total height
- 188 mm
Photo: HVT-50D. D: assembly 1. LD: assembly 0. Verify post orientation and terminal connection requirements.
SSB HVT AGM Batteries: Compare Models & Find Your Fit
SSB HVT · SUNCOAST BATTERIES
Compare the models. Confirm the fit.
Starting power or accessory capacity?
Starting needs
Match the vehicle specification, cranking requirement and physical fit. A higher CCA number cannot correct the wrong terminal layout, mounting or battery technology.
Auxiliary and deep-cycle needs
Assess your loads, permitted discharge and charging system. Rated Ah is useful for comparison, but it does not guarantee a particular runtime or replace a starting-reserve plan.
Compare four HVT families
All models below are manufacturer-listed as 12 V. D and LD have different terminal assemblies; check the actual positive and negative posts before choosing. Product pages show current pricing and availability.
HVT-70D / 70LD
- Cranking
- 620 CCA
- Capacity
- 85 Ah (20-hour)
- Case L × W × H
- 259 × 168 × 208 mm
- Total height
- 214 mm
Photo: HVT-70LD. D: assembly 1. LD: assembly 0. Verify post orientation and terminal connection requirements.
HVT-70ZZD / 70ZZLD
- Cranking
- 780 CCA
- Capacity
- 105 Ah (20-hour)
- Case L × W × H
- 305 × 168 × 207 mm
- Total height
- 213 mm
Photo: HVT-70ZZLD. D: assembly 1. LD: assembly 0. Verify post orientation and terminal connection requirements.
HVT-86D / 86LD
- Cranking
- 1000 CCA
- Capacity
- 130 Ah (20-hour)
- Case L × W × H
- 330 × 173 × 212 mm
- Total height
- 220 mm
Photo: HVT-86D. D: assembly 1. LD: assembly 0. Verify post orientation and terminal connection requirements.
Specifications checked against SSB’s current 4WD table on 24 October 2026. Older brochures can list different capacities; confirm the supplied model and revision when ordering.
Why consider HVT AGM?
SSB identifies this range as valve-regulated lead-acid AGM, with dual-purpose models for compatible starting and deep-cycle applications. SSB also lists under-bonnet suitability. Confirm the particular vehicle, location and operating conditions rather than assuming every installation is suitable.
The sealed design needs no water top-ups. It still needs appropriate charging, secure mounting, specified ventilation and routine condition checks.
Send these details for a fit check
- Vehicle year, make, model and engine, or the equipment application.
- Required voltage and the complete existing battery code.
- Available length, width and total height, including terminal clearance.
- A safely accessible photo of the label and actual positive/negative terminal positions.
- Cable reach, terminal connection type and hold-down arrangement.
- Charger model, accessory loads and any stop-start or electrical modifications.
Looking for motorcycle HVT?
HVT-1–9 are motorcycle and powersport starting products, separate from the larger dual-purpose case families above. Match the exact bike, battery code and terminal layout; the HVT name alone does not establish fitment.
Before you choose
What is the difference between D and LD?
SSB lists different terminal assemblies: 1 for D and 0 for LD in these families. Compare the actual posts, cable reach and terminal connections. Similar dimensions and ratings do not make the layouts interchangeable.
Is HVT a lithium battery?
These HVT models are AGM lead-acid batteries. Do not select lithium charger settings or assume a lithium replacement is a direct swap.
Which charger should I use?
Choose a charger with a profile and current limits appropriate to the exact HVT model. Send the battery and charger model numbers; AGM on the charger label is only the start of the check.
Can I fit HVT to a stop-start vehicle?
AGM construction alone does not establish stop-start compatibility. Match the vehicle manufacturer specification and confirm any battery-management registration or reset requirements.
Which capacity should I choose?
For starting, follow the vehicle application. For accessory power, assess daily energy, reserve and charging opportunities using the battery manufacturer’s operating limits. Do not choose solely by the largest Ah number that fits.
Explore your application
Choose with the fit confirmed.
Send your battery details and suburb for a clear quote. Availability, mobile delivery and any fitting depend on your application and location.
Friendly help, flexible payment options and no pressure. Ask us for an obligation-free quote and let’s get your battery sorted. Afterpay and card payment on delivery available. Ask about options when booking. Afterpay eligibility and terms apply.